Your Antioch teamPlumbing & HVAC across the East Bay
Mon–Fri 8 AM–6 PM · Sat 10 AM–2 PM(925) 757-7000

Antioch heating & air services

Heating Installation
in Antioch, CA

A new heating system should fit the home’s heat loss and existing distribution system. In Demand Plumbing, Heating & Air provides heating installation services in Antioch.

Serving homeowners across the East Bay with furnace and heating system installation and replacement tailored to your home.

In Demand Plumbing, Heating & Air team with branded service vehicles in Antioch, serving Antioch, CA for heating installation

Local service information

What Antioch Homeowners Should Know About Heating Installation

We assess heating capacity, fuel or electrical requirements, and equipment placement before installation. Across Antioch, from Country Hills to other residential areas, home layouts and existing systems vary; an on-site evaluation guides the recommendation. The best option depends on the building and how the household uses its heating system. We serve homeowners in Rivertown, Hillcrest, and other Antioch neighborhoods, with service focused on the actual plumbing or HVAC issue.

Neighborhood and housing context

Rivertown, Hillcrest, and Somersville are local residential areas or corridors in Antioch. Antioch has older residential streets near Rivertown as well as later subdivisions along the Lone Tree and Deer Valley corridors.

Heating Installation service considerations

Heating installation planning considers sizing, distribution, and existing utilities. For appointments near Rivertown and Hillcrest, access and existing system condition help determine the appropriate next steps.

Local heating installation considerations

  • Calculate heating load; review ductwork, electrical or gas supply and permits. Heating installation planning considers sizing, distribution, and existing utilities. Properties in Rivertown and Hillcrest can differ in equipment location and service access.

When to get help

Is this the service your home needs?

  • Your heating equipment needs replacement
  • You are comparing furnace and heat-pump options
  • A home project changes your heating requirements

Our approach

Heating Installation for your Antioch property.

We review the current installation and the needs of the home. Equipment selection considers compatibility, available energy supply and the supporting installation work. We discuss the proposed system and scope, including any changes identified during the assessment. The project is planned around the property rather than a single equipment specification.

Describe the issue and any previous work when arranging your appointment. We explain the findings and proposed scope so you can make an informed decision.

See our work

Relevant Projects for Antioch

Real work from In Demand Plumbing, Heating & Air. Explore actual repairs, installations and other completed projects from our service areas.

In Demand Plumbing, Heating & Air technicians practicing copper pipe brazing on an HVAC coil during hands-on technical training in preparation for heating season.

Antioch, CA · Local project

HVAC Technician Training – Furnace Tune-ups and Repair Preparation

The In Demand Plumbing, Heating & Air team participates in hands-on HVAC training to strengthen technician skills in heating and air conditioning diagnostics, equipment servicing, and repair techniques. As furnace tune-up and repair season approaches, our technicians continue sharpening their skills

View full project
Goodman outdoor heat pump mounted on an equipment pad beside a home with blue siding.

Brentwood, CA · Completed project

Goodman 4-Ton Heat Pump and High-Efficiency Gas Furnace Installation

In Demand Plumbing, Heating & Air completed the installation of a Goodman 4\-ton variable\-speed communicating heat pump paired with a high\-efficiency gas furnace\. The system combines electric heating and cooling with gas heating for year\-round home comfort\.

View full project
Indoor air handler installed in a garage with insulated ductwork, refrigerant connections, and white condensate drain piping.

Pittsburg, CA · Completed project

Single-Stage Heat Pump and Whole-Home Air Scrubber Installation

In Demand Plumbing, Heating & Air installed a single-stage heat pump system with a matching indoor air handler and a whole-home air scrubber for year-round heating, cooling, and indoor air quality.

View full project

Planning your new heating system

Match the equipment to the home.

01

Evaluate the existing system

We review the current heating equipment, home requirements and installation conditions.

02

Compare system options

We discuss furnace, heat-pump and other suitable configurations along with compatibility requirements.

03

Confirm the project scope

We explain the selected equipment and supporting installation work before the project is scheduled.

Products & Equipment

Equipment options for heating installation

Discover how the right equipment can improve comfort, efficiency, and everyday life at home. We'll help you compare options suited to your property.

Lennox MMLD multi-zone ductless mini-split heat pump outdoor unit for residential heating and cooling.

Lennox MMLD Multi-Zone Ductless Mini-Split Heat Pump System

Lennox · MMLD — multi-zone outdoor unit product family. Exact model number must be selected based on system capacity and indoor-unit configuration.

Tired of rooms that are always too hot or too cold? Whether it's an upstairs bedroom that never cools down, a home office that needs extra comfort, or a house without traditional ductwork,…

Individual Room Temperature Control

Connects up to five compatible indoor zones to one outdoor unit, allowing homeowners to customize comfort in different areas.

High-Efficiency Heating and Cooling

Offers efficiency ratings up to 23.00 SEER2 and 10.50 HSPF2, depending on the matched system.

Cold-Climate Heat Pump Technology

Designed to maintain heating capacity in cold weather, with operation down to -13°F under specified conditions.

See All Features & Specifications

Tired of rooms that are always too hot or too cold? Whether it's an upstairs bedroom that never cools down, a home office that needs extra comfort, or a house without traditional ductwork, the Lennox MMLD Multi-Zone Ductless Mini-Split System offers a flexible way to heat and cool different areas of your home. Unlike conventional central HVAC systems that distribute conditioned air through ductwork, the Lennox MMLD connects one outdoor heat pump to multiple compatible indoor units. Each indoor unit serves a designated area, allowing you to set different temperatures for different rooms or zones. Its inverter-driven compressor adjusts operation as heating and cooling needs change, helping maintain consistent temperatures without repeatedly running at full capacity. The MMLD is an attractive option for older homes without existing ductwork, room additions, converted garages, and homeowners who want more personalized temperature control. Wall-mounted and other compatible indoor-unit styles may be available depending on the selected system. Because this is a heat pump, it provides both heating and cooling without requiring a separate gas furnace. However, all connected indoor zones operate within the system's available capacity and operating mode limitations. In Demand Plumbing, Heating & Air can evaluate your home's layout, calculate heating and cooling requirements, recommend appropriate indoor-unit locations, and professionally install a Lennox multi-zone system designed around your comfort needs.

Additional features

  • Variable-Capacity Compressor — Adjusts heating and cooling output as demand changes to help maintain consistent indoor temperatures.
  • Ductless Installation Flexibility — Ideal for homes without existing ductwork, room additions, and spaces that need individualized temperature control.
  • SmartThings App Integration — Supports remote temperature adjustments, system monitoring, and compatible smart-home automation.
  • Quiet Operation — Designed for reduced operating noise compared with many traditional heating and cooling configurations.
  • 1. Durable Outdoor Cabinet — Galvanized steel construction with a baked-on, powder-coated finish helps protect the equipment against outdoor exposure.

Specifications

Product Series
MMLD Multi-Zone
System Type
Ductless mini-split heat pump
Heating and Cooling
Both
Maximum Indoor Zones
Up to 5
Cooling Efficiency
Up to 23.00 SEER2
Heating Efficiency
Up to 10.50 HSPF2
Cold-Climate Performance
Maintains 100% heating capacity at 5°F under specified conditions
Minimum Heating Operating Temperature
As low as -13°F
Refrigerant
Lower-GWP, 2025-compliant refrigerant; exact designation requires model-specific verification

Warranty information

Manufacturer Warranty: - 5-year limited warranty on covered components. - 7-year limited warranty on the compressor. These terms are published on the official Lennox MMLD product page. Coverage conditions, exclusions, registration requirements, and eligibility must be confirmed using the applicable warranty certificate.

Lennox SL25KCV Signature variable-capacity air conditioner designed for high-efficiency cooling, quiet operation, and consistent indoor comfort.

Lennox Signature Premium Gas Heating & Cooling

Lennox · SL25KCV & SLP99VK

Exceptional Cooling. Precise Heating. Complete Home Comfort.

Variable-Capacity Cooling

The Lennox SL25KCV adjusts cooling output to maintain consistent indoor temperatures and reduce noticeable temperature swings.

Variable-Capacity Gas Heating

The Lennox SLP99VK adjusts heating output to provide consistent warmth without frequent full-power cycling.

Premium Energy Efficiency

High-efficiency cooling and gas heating can help reduce energy consumption compared with older, less efficient systems.

See All Features & Specifications

Exceptional Cooling. Precise Heating. Complete Home Comfort.

Experience premium year-round comfort with the Lennox Signature Gas Heating & Cooling System, featuring the SL25KCV variable-capacity air conditioner and a compatible Lennox Signature gas furnace.

Unlike conventional heating and cooling systems that operate primarily at full capacity, this advanced system is designed to adjust its output to your home's changing comfort needs.

The SL25KCV delivers high-efficiency cooling with quieter operation and more consistent indoor temperatures. Paired with a Lennox variable-capacity gas furnace, the system provides precise heating during cooler months and variable-speed airflow throughout the home.

Advanced communicating controls help coordinate equipment performance, while properly matched indoor components support improved humidity management and consistent comfort.

Why homeowners choose this system:

  • Premium cooling and dependable natural gas heating
  • More consistent indoor temperatures
  • Quieter operation compared with conventional single-stage equipment
  • High-efficiency performance that can help reduce energy consumption
  • Improved humidity management with properly matched equipment
  • Smart comfort control through a compatible Lennox thermostat
  • Professional system sizing, installation, and commissioning

At In Demand Plumbing, Heating & Air, we design heating and cooling installations around the needs of your home, not simply the size of your existing equipment. Premium comfort in every season.

Additional features

  • Quiet Heating and Cooling — Variable-capacity operation allows the equipment to run at lower output when full capacity is unnecessary.
  • Advanced Humidity Control — Compatible variable-speed indoor airflow helps manage indoor humidity during cooling.
  • Precise Comfort Technology — Lennox communicating technology coordinates compatible equipment for more accurate temperature control.
  • Lennox S40 Smart Thermostat — Provides connected comfort management and compatible system communication.
  • R-454B Refrigerant — Uses refrigerant with a lower global warming potential than R-410A.
  • Variable-Speed Airflow — The furnace blower adjusts airflow to support comfort, efficiency, and quieter operation.
  • Professional System Matching — Properly matched indoor and outdoor equipment helps deliver reliable performance and certified efficiency.

Specifications

System Type
Split-System Air Conditioner with Gas Furnace
Air Conditioner Model
Lennox SL25KCV
Furnace Model
Lennox SLP99VK
Air Conditioner Compressor
Variable Capacity
Furnace Heating Technology
Variable-Capacity Gas Heating
Cooling Efficiency
Up to 25.10 SEER2, depending on matched equipment
Furnace Efficiency
Up to 99% AFUE, depending on model
Refrigerant
R-454B

Warranty information

Lennox Signature Collection Manufacturer Limited Warranty The Lennox SL25KCV air conditioner and SLP99VK gas furnace offer manufacturer limited warranty coverage for qualifying residential installations. Eligible Lennox Signature equipment may include up to 10 years of limited coverage on specified components, subject to the applicable model warranty certificate. Additional coverage options may be available through Lennox Warranty Your Way, depending on equipment eligibility, installation date, and applicable terms. Warranty coverage for the air conditioner, furnace, evaporator coil, thermostat, and accessories may differ. All warranties are subject to Lennox's official terms, conditions, and exclusions. Manufacturer warranty coverage is separate from any installation or workmanship warranty provided by In Demand Plumbing, Heating & Air.

Lennox SL22KLV Signature Collection cold-climate heat pump with variable-capacity heating and cooling.

Lennox SL22KLV Dave Lennox Signature Collection Cold Climate Heat Pump

Lennox · SL22KLV

What if one heating and cooling system could keep your home comfortable year-round, operate quietly, and adjust automatically instead of constantly switching between full power and off? The…

Variable-Capacity Heating and Cooling

Adjusts compressor output in increments as small as 1% to help maintain consistent temperatures without unnecessary full-power operation.

Advanced Cold-Climate Performance

Uses Electronic Refrigerant Injection technology to support heating in outdoor temperatures as low as -20°F.

Up to 21.10 SEER2 Efficiency

Provides high-efficiency cooling that may reduce electricity consumption compared with older, less-efficient equipment.

See All Features & Specifications

What if one heating and cooling system could keep your home comfortable year-round, operate quietly, and adjust automatically instead of constantly switching between full power and off? The Lennox SL22KLV Cold Climate Heat Pump is designed to deliver precisely that kind of comfort. Part of the premium Dave Lennox Signature Collection, the SL22KLV provides both heating and air conditioning using electricity. During summer, it removes heat from your home. During cooler months, it transfers outdoor heat inside to provide warmth. Unlike traditional single-stage equipment, its variable-capacity compressor continuously adjusts output to match your home's needs. This helps maintain steadier indoor temperatures, reduce noticeable temperature swings, and support efficient operation. With cooling efficiency up to 21.10 SEER2 and heating efficiency up to 10.50 HSPF2, the SL22KLV is designed for homeowners who value comfort and energy efficiency. Its advanced cold-climate technology also supports heating operation in outdoor temperatures as low as -20°F. The system can be paired with compatible Lennox equipment for all-electric heating and cooling or configured with a gas furnace for dual-fuel operation. For homeowners replacing an aging air conditioner or furnace, the SL22KLV offers an opportunity to upgrade to a sophisticated, year-round comfort system. In Demand Plumbing, Heating & Air can evaluate your home's heating and cooling needs, recommend the appropriate equipment combination, and professionally install and configure your Lennox heat pump.

Additional features

  • Quiet Operation — SilentComfort technology, a variable-speed fan, and sound-dampening components help minimize outdoor operating noise.
  • Lennox S40 Smart Thermostat Integration — Enables coordinated temperature control, system diagnostics, and convenient smartphone adjustments.
  • All-Electric or Dual-Fuel Flexibility — Can operate with a compatible electric air handler or Lennox communicating gas furnace, giving homeowners options for heating their homes.
  • Climate IQ Technology — Adjusts system operation to help manage indoor humidity and comfort under changing conditions.
  • 1. Durable Quantum Coil — Features a corrosion-resistant aluminum outdoor coil and protective cabinet designed for long-term outdoor exposure.

Specifications

Product Series
Dave Lennox Signature Collection
Model Family
SL22KLV
Equipment Type
Cold-climate, variable-capacity heat pump
Nominal Capacity
2, 3, 4, and 5 tons
Cooling Capacity Range
22,200–56,000 BTU/h across family
Heating Capacity Range
21,600–60,000 BTU/h across family
Cooling Efficiency
Up to 21.10 SEER2
Heating Efficiency
Up to 10.50 HSPF2
Refrigerant
R-454B
Cold-Climate Heating
Operates down to -20°F
Cooling Operation
Down to 0°F outdoor temperature
Thermostat
Lennox S40 communicating thermostat required; ordered separately

Warranty information

Manufacturer Warranty: - 10-year limited warranty on the compressor for qualifying residential installations. - 10-year limited warranty on other covered components for qualifying residential installations. - Lennox Warranty Your Way may provide additional options for eligible homeowners, subject to program terms. Warranty coverage is subject to the applicable certificate, registration or eligibility requirements, and exclusions. Labor is not automatically included in the standard parts warranty.

Lennox SLP99V variable-capacity gas furnace with up to 99% AFUE heating efficiency.

Lennox SLP99V Dave Lennox Signature Collection Gas Furnace

Lennox · SLP99V

Tired of uneven temperatures, noisy heating cycles, or a furnace that constantly turns on and off? The Lennox SLP99V Gas Furnace is designed to deliver quieter, more consistent warmth while…

Variable-Capacity Heating

Automatically adjusts heat output to better match your home's heating demand, reducing large temperature swings.

Up to 99% AFUE Efficiency

Converts nearly all the fuel's energy into usable heat under standardized testing conditions, potentially reducing gas consumption compared with older furnaces.

Variable-Speed Blower Motor

Adjusts airflow to help distribute heat evenly while supporting quieter operation.

See All Features & Specifications

Tired of uneven temperatures, noisy heating cycles, or a furnace that constantly turns on and off? The Lennox SLP99V Gas Furnace is designed to deliver quieter, more consistent warmth while using fuel efficiently. Part of the Dave Lennox Signature Collection, the SLP99V is a premium variable-capacity gas furnace with efficiency ratings up to 99% AFUE. That means up to 99% of the fuel's energy is converted into usable heat under standardized testing conditions, helping reduce wasted energy compared with many older, lower-efficiency furnaces. Unlike traditional single-stage furnaces that operate at full heating output whenever they turn on, the SLP99V can adjust its heat output in small increments to match your home's changing heating needs. Its variable-speed blower also adjusts airflow to help maintain more even temperatures and quieter operation. When paired with compatible Lennox communicating controls and cooling equipment, the furnace can support advanced comfort features, humidity management, and coordinated heating and cooling operation. The SLP99V is especially appealing for homeowners replacing an aging gas furnace who prioritize comfort, quiet performance, and long-term heating efficiency. Installation requirements, equipment compatibility, and the cost of upgrading should be considered before selecting this premium model. In Demand Plumbing, Heating & Air can evaluate your existing heating system, determine the proper furnace size, and professionally install and configure the Lennox SLP99V for your home's heating needs.

Additional features

  • SilentComfort Technology — Uses a fully insulated cabinet and variable-speed operation to reduce noticeable heating noise.
  • Precise Comfort Technology — Works with compatible Lennox communicating controls to make fine adjustments for more consistent indoor temperatures.
  • Lennox S40 Smart Thermostat Compatibility — Supports connected comfort controls, diagnostics, and smart scheduling with compatible equipment.
  • Enhanced Humidity Control — Can coordinate airflow with compatible cooling equipment to improve summer moisture management.
  • 1. Dual-Fuel Compatibility — Can work with an appropriately matched heat pump, allowing the system to select between electric heating and gas heating based on its configuration.

Specifications

Product Series
Dave Lennox Signature Collection
Model Family
SLP99V
Equipment Type
Modulating gas furnace
Fuel
Natural Gas
Heating Efficiency
Up to 99% AFUE
Heating Operation
Modulating / variable capacity
Blower Motor
Variable speed
Sound Reduction
SilentComfort Technology
Thermostat
Compatible Lennox communicating controls, including S40

Warranty information

Lennox lists warranty coverage for eligible SLP99V furnaces under its Dave Lennox Signature Collection warranty program. - Covered components: Up to 10 years of parts coverage under the applicable warranty program. - Heat exchanger: 20-year or limited lifetime coverage, depending on the exact model and warranty terms. - Warranty Your Way: Eligible homeowners may choose the default 10-year parts-only coverage or an alternative combining 3 years of labor coverage with 7 years of parts coverage. Eligibility, registration, exclusions, and warranty selection conditions apply. Verify the exact warranty certificate for the installed furnace.

Lennox iComfort S40 smart programmable thermostat with 7-inch touchscreen for home heating and cooling control.

Lennox iComfort S40 Ultra Smart Programmable Thermostat

Lennox · iComfort S40

Imagine walking into a home that's already at your ideal temperature, without constantly adjusting the thermostat. The Lennox iComfort S40 Ultra Smart Programmable Thermostat makes managing…

7-Inch HD Color Touchscreen

Large, easy-to-read display makes adjusting temperatures, schedules, humidity settings, and comfort preferences simple.

Smart Away Technology

Uses smartphone location information to automatically adjust temperatures when household members leave or return.

Schedule IQ Technology

Adapts heating and cooling schedules to changing household routines for convenient comfort management.

See All Features & Specifications

Imagine walking into a home that's already at your ideal temperature, without constantly adjusting the thermostat. The Lennox iComfort S40 Ultra Smart Programmable Thermostat makes managing your home's heating and cooling easier with intelligent controls, personalized comfort settings, and convenient access from almost anywhere. Featuring a sleek color touchscreen, the iComfort S40 allows you to create heating and cooling schedules that fit your daily routine. Whether you're heading to work, returning home, or getting ready for bed, your thermostat can help maintain comfortable temperatures while reducing unnecessary system operation. What makes the iComfort S40 different from many conventional smart thermostats is its ability to communicate with compatible Lennox HVAC equipment. Instead of simply switching heating and cooling on or off, it can coordinate with supported variable-capacity and multi-stage systems for more precise temperature control. The thermostat also supports remote adjustments through the Lennox Home App, compatible voice assistants, and advanced indoor air quality management when paired with qualifying accessories. For homeowners upgrading to a compatible Lennox heating and cooling system, the iComfort S40 can serve as the central control for year-round comfort. In Demand Plumbing, Heating & Air can evaluate compatibility, professionally install the thermostat, configure its settings, and help you get the most from your Lennox comfort system.

Additional features

  • Feels Like Temperature Control — Considers temperature and humidity to help maintain how comfortable your home actually feels.
  • Lennox Home App Control — Adjust heating, cooling, fan settings, and schedules remotely through a compatible smartphone or tablet.
  • Advanced HVAC Communication — Coordinates with compatible Lennox communicating equipment to support precise, efficient heating and cooling operation.
  • Indoor Air Quality Integration — Connects with the Lennox Smart Air Quality Monitor and compatible air cleaning equipment for enhanced indoor air management.
  • 1. Smart Home and System Diagnostics — Supports compatible voice assistants, maintenance reminders, and diagnostic information that can help technicians troubleshoot equipment.

Specifications

Model
S40 Smart Thermostat
Thermostat Type
Smart programmable communicating thermostat
Display
7-inch HD color touchscreen
Screen Resolution
1280 × 800 pixels
Connectivity
Wi-Fi and compatible smart accessory wireless connections
Mobile Control
Lennox Home App
Voice Control
Amazon Alexa and Google Assistant
HVAC Compatibility
Lennox communicating equipment; certain conventional systems require an optional Equipment Interface Module
Zoning
Up to 4 zones with compatible Lennox Smart Zoning equipment

Warranty information

Manufacturer Warranty: Lennox advertises a 10-year limited warranty for the S40 Smart Thermostat. Coverage is subject to the applicable Lennox warranty terms, including eligibility, exclusions, and any registration requirements. These conditions should be confirmed before publishing.

Lennox PureAir S whole-home air purification system with MERV 16 filtration and smart monitoring.

Lennox PureAir S Whole-Home Air Purification System

Lennox · PureAir S (product family). Exact cabinet model or catalog number must be confirmed for the selected installation.

Dust settling on your furniture, lingering cooking odors, and airborne allergens can make your home feel less comfortable, even when your heating and cooling system is working perfectly.…

MERV 16 High-Efficiency Filtration

Captures fine airborne particles that many standard residential HVAC filters allow to pass through.

Whole-Home Air Purification

Treats circulating air through the central heating and cooling system rather than relying on separate portable units in individual rooms.

Three-Part Air Treatment

Combines particle filtration, carbon-based odor control, and a UVA purification process to address multiple indoor air contaminants.

See All Features & Specifications

Dust settling on your furniture, lingering cooking odors, and airborne allergens can make your home feel less comfortable, even when your heating and cooling system is working perfectly. The Lennox PureAir S Whole-Home Air Purification System is designed to help address these everyday indoor air quality concerns throughout your home. Unlike portable air purifiers that clean the air in a single room, the PureAir S works with your home's central HVAC system to treat air as it circulates through the ductwork. Its MERV 16 filtration captures fine airborne particles, including dust, pollen, pet dander, and certain microscopic contaminants. The system also combines activated carbon filtration with a UVA-based purification process to help reduce household odors, chemical vapors, and ozone already present in indoor air. For added convenience, built-in sensors monitor filter and purification component usage, providing maintenance notifications through a compatible Lennox smart thermostat. The PureAir S is particularly appealing for homeowners looking for more comprehensive filtration than a standard HVAC filter provides. However, it requires compatible equipment, periodic replacement components, and sufficient airflow to operate properly. In Demand Plumbing, Heating & Air can evaluate your existing heating and cooling system, determine whether the PureAir S is a suitable upgrade, and professionally install and configure it for reliable whole-home air purification.

Additional features

  • Household Odor Reduction — Helps reduce certain cooking odors, pet odors, and chemical vapors that can linger indoors.
  • Ozone Reduction — Designed to remove existing ozone from indoor air without producing ozone as part of its purification process.
  • Smart Maintenance Notifications — Built-in sensors track filter and purification component usage and communicate maintenance needs through compatible Lennox controls.
  • Low-Resistance Filter Design — Deep-pleated filter media is engineered to provide effective filtration while limiting unnecessary airflow restriction.
  • 1. Integrated Lennox Comfort Control — Works with supported Lennox communicating equipment to coordinate air purification and maintenance monitoring.

Specifications

Product family
PureAir S / PCO3S
Models
PCO3S-14-16, PCO3S-16-16, PCO3S-20-16
Catalog numbers
Y8905, Y8904, Y8903 respectively
Filtration rating
MERV 16
Larger particle filtration
Up to 99.99% at 3 microns
Fine particle filtration
Up to 95% at 0.3 microns
Air treatment
Carbon Clean 16 filter, UVA lamp, photocatalytic oxidation cartridge
Filter life
Up to 12 months, dependent on use
UVA lamp rated life
12 months
Smart thermostat
Lennox S40 for full current-generation smart features

Warranty information

Manufacturer Warranty: Lennox lists a 10-year limited warranty on covered components for residential applications and a 1-year limited warranty on covered components for nonresidential applications. Registration requirements, exclusions, consumable component coverage, and other conditions require confirmation against the applicable warranty certificate.

Lennox S40 smart thermostat showing indoor air quality information from a connected monitor.

Lennox Smart Air Quality Monitor

Lennox

Wondering what's really in the air your family breathes every day? Dust, airborne particles, and invisible pollutants can affect indoor air quality without you even realizing it. The Lennox…

Real-Time Air Quality Monitoring

Continuously tracks indoor pollutants so homeowners can better understand changing air conditions.

Three Pollutant Measurements

Detects PM2.5 fine particles, carbon dioxide, and volatile organic compounds.

Automatic Air Cleaning Response

Works with compatible HVAC filtration, purification, and ventilation equipment to respond when air quality declines.

See All Features & Specifications

Wondering what's really in the air your family breathes every day? Dust, airborne particles, and invisible pollutants can affect indoor air quality without you even realizing it. The Lennox Smart Air Quality Monitor helps take the guesswork out of maintaining a cleaner, more comfortable home. This intelligent monitoring system continuously measures fine airborne particles (PM2.5), carbon dioxide (CO2), and volatile organic compounds (VOCs), which can come from household products, cooking, and other everyday activities. When connected to a compatible Lennox S40 Smart Thermostat, the monitor displays indoor air quality readings and alerts you when conditions change. You can also check your home's air quality through the Lennox Home App. What makes this system especially useful is its ability to work with compatible Lennox air filtration, purification, and ventilation equipment. When air quality declines, your HVAC system can automatically circulate, filter, or refresh indoor air based on the equipment installed. Unlike a basic standalone air quality sensor, this monitor can help your heating and cooling system respond to changing indoor conditions. In Demand Plumbing, Heating & Air can evaluate your existing HVAC equipment, confirm compatibility, and professionally install and configure the Lennox Smart Air Quality Monitor to help you take greater control of your home's indoor environment.

Additional features

  • Lennox S40 Integration — Sends air quality information directly to the compatible smart thermostat.
  • Smartphone Monitoring — View indoor air quality readings through the Lennox Home App when properly connected.
  • Intelligent Ventilation Control — With compatible ventilation equipment, the system can consider outdoor conditions before introducing outside air.
  • Wireless Communication — Communicates with the thermostat through Lennox's wireless smart-device network.
  • 1. Expandable Wireless Coverage — Supports a compatible Lennox Wireless Extender for homes where signal coverage needs improvement.

Specifications

Product Type
Indoor air quality monitoring accessory
Monitoring
Continuous; sends readings approximately every minute
Thermostat Compatibility
Lennox S40 Smart Thermostat; additional compatibility must be verified
Communication
Bluetooth Low Energy / BLE Mesh
Air Cleaning
Requires compatible HVAC equipment
Installation
Professional installation required

Warranty information

Manufacturer Warranty: Lennox lists a 2-year limited warranty on covered components. Registration requirements, exclusions, and eligibility conditions should be checked against the applicable warranty document before approval.

Little Firefighter earthquake-activated gas shutoff valve installed on residential natural gas piping by In Demand Plumbing, Heating & Air.

Little Firefighter Earthquake Gas Shutoff Valve

Little Firefighter

Automatic Gas Shutoff Protection When an Earthquake Strikes

Automatically interrupts gas flow when qualifying seismic shaking occurs

Does not depend on household electricity

Helps limit continued gas supply to downstream piping after activation

See All Features & Specifications

Automatic Gas Shutoff Protection When an Earthquake Strikes

At In Demand Plumbing, Heating & Air, we believe a new heating system should be installed with safety in mind. That's why we install Little Firefighter earthquake-activated gas shutoff valves when required by applicable codes or appropriate for the installation.

During a significant earthquake, damaged gas piping and connections can create dangerous gas leaks. A Little Firefighter seismic gas shutoff valve is designed to automatically stop gas flow when earthquake shaking reaches its activation threshold, helping reduce the risk of continued gas flow through damaged downstream piping.

Unlike a manually operated gas shutoff valve, this safety device works automatically and does not require electricity or homeowner intervention to activate.

Why homeowners benefit:

  • Automatic earthquake protection: Helps shut off gas during sufficiently strong seismic activity.
  • Reduces potential fire hazards: Limits continued gas flow if downstream piping is damaged.
  • No electricity required: Operates mechanically, even during a power outage.
  • Added peace of mind: Provides another layer of protection for gas-fired heating equipment and connected gas piping.
  • Professional installation: Proper sizing, placement, and testing help ensure the valve is installed for its intended application.
  • Code-conscious installation: Helps meet applicable seismic gas shutoff requirements where required by the permitting authority.

Our technicians install gas safety equipment as part of a properly planned heating system installation, helping protect your home beyond everyday heating and cooling performance.

Because a quality HVAC installation isn't just about comfort. It's also about protecting your home and family.

Additional features

  • Allows qualified personnel to restore operation after safety checks
  • Residential Gas Applications - Suitable for compatible gas piping installations
  • Safety-Focused Installation - Adds a protective component to gas-fired equipment installations

Current offers

Heating Installation promotions in Antioch

$50 Off HVAC Service of $500 or More

$50 Off HVAC Service of $500 or More

$50 off

Save $50 on qualifying heating and air conditioning services totaling $500 or more with In Demand Plumbing, Heating & Air. Whether you need AC or heating repairs, we're here to help keep your home comfortable.

Offer ends: December 31, 2027

View Terms & Conditions

Valid on qualifying HVAC services with a pre-discount subtotal of $500 or more. $50 discount applies to one qualifying service transaction. Cannot be combined with other offers. Additional restrictions may apply.

Book online
5% Senior Discount — Ages 65 & Older

5% Senior Discount — Ages 65 & Older

5% off

At In Demand Plumbing, Heating & Air, we appreciate our senior community! Customers aged 65 and older receive 5% off their entire plumbing, heating, or air conditioning job, including labor, materials, and equipment. From everyday repairs to complete system installations, we're proud to help seniors save on home comfort services.

Offer ends: December 31, 2027

View Terms & Conditions

Valid for customers aged 65 or older. Discount applies to the entire job invoice, including labor, materials, and equipment. Proof of age may be required. Cannot be combined with any other offers, coupons, promotions, or discounts.

Book online
5% Military Discount

5% Military Discount

5% off

In Demand Plumbing, Heating & Air proudly offers a 5% military discount to active-duty military members and veterans as a thank-you for their service. Save 5% on your entire plumbing, heating, or air conditioning job, including labor, materials, and equipment.

Offer ends: December 31, 2027

View Terms & Conditions

Valid for active-duty military members and veterans. Discount applies to the entire job invoice, including labor, materials, and equipment. Proof of military service or veteran status may be required. Cannot be combined with any other offers, coupons, promotions, or discounts.

Book online
View all coupons →

We install it. We stand behind it.

The In Demand Comfort Guarantee

The In Demand Comfort Guarantee shield — worry-free comfort for the life of your equipment

Our installation guarantees explain how we stand behind eligible equipment installations and respect your home during the work.

Lifetime Labor Guarantee

We stand behind our craftsmanship for the life of the equipment we install.

Comfort Guarantee

If you’re not comfortable with the performance of your new system, we’ll make it right.

No-Surprise Installation Guarantee

The price we agree on is the price you pay. No surprise labor charges.

Property Protection Guarantee

We respect your home like it’s our own. We protect your property and clean our work area when we’re finished.

Installation Quality Guarantee

Done right. Tested right. Explained right. Every system is installed to code, started, tested and walked through with you.

Lifetime Labor Guarantee requirements: Equipment must be installed by In Demand Plumbing, Heating & Air; the Home Protection Plan must remain active without interruption; and required maintenance must be completed as scheduled. Guarantees apply to eligible work and are subject to their full terms.

Read the complete Comfort Guarantee terms →

Home protection plans

Maintenance Plans for Year-Round Comfort

Explore ongoing maintenance and member benefits for your home. Choose the coverage that fits your needs.

HVAC Maintenance Plan

$14.95/month

  • Two annual visits: heating and cooling
  • Standard filter and condenser coil cleaning
  • 48-hour priority service
  • 10% off repair parts
  • 5% off equipment and indoor air quality products
Explore HVAC plan

HVAC + Plumbing Maintenance Plan

$24.95/month

  • All HVAC Maintenance Plan benefits
  • Annual plumbing inspection
  • Water quality test
  • Tank water heater flush
  • Camera inspection of the accessible main line
Explore HVAC + Plumbing plan

Plan benefits and services are subject to the applicable membership terms. The Comfort Guarantee and maintenance plan eligibility are not identical.

Your questions

Heating Installation questions.

Can I switch from a furnace to a heat pump?

It may be possible, but electrical supply, system configuration and the home’s requirements need review. We discuss a suitable approach after the assessment.

How do I choose the right heating system?

The home, existing system, energy source, distribution and comfort goals should all be considered when selecting equipment.

Can I replace a furnace with a heat pump?

It may be possible. Electrical supply, system configuration and the needs of the home need to be reviewed first.

Does heating replacement include ductwork?

Only when ductwork changes are included in the proposed scope. Existing ducts should be reviewed as part of the project.

How long does heating-system installation take?

The schedule depends on the equipment and any supporting work required for the property.

Do you serve homes outside Antioch?

Yes. Explore our service areas or contact our team about your property address.

Customer voices

Reviews from our Antioch location

Awards & recognition

Recognized in Antioch and across the East Bay.

Awards, accreditation and community recognition earned by In Demand Plumbing, Heating & Air.

Talk to our team

Get help with heating installation.

Schedule heating installation for your Antioch property or call our team about the problem.

Call our teamSchedule service