Dealing with Clogged Drains in Your Antioch Home
One of the most common Antioch plumbing problems in most homes is clogged drains. This is something that must not be ignored, or else, you will be faced with bigger problems, especially with the internal structures and on your pipelines. While calling a plumber may be the first thing that will come to your mind when it comes to this ordeal, you can opt to deal with the situation on your own if the problem appears to be manageable.
What to do?
You can deal with clogged drains by applying a technique that works most of the time. Here’s what you ought to do. Start performing the task if there is standing water. If there is none, you can opt to pour water into the area where the problem appears. The drains and air vents must be sealed. You can put the suction cup of your plunger on the drain until you are quite certain that everything has been covered.
You have to exert effort in pushing and pulling that suction. You have to remember that you are doing this for the clog to move. After several times of pushing and pulling, you can remove the plunger. You simply have to observe at this point if the water is already going down the drain quite easily. If there still seems to be a problem, no matter how minor it is, you simply have to repeat using the plunger until the problem is completely solved.
Checking Various Parts of Your Home
There are vital parts of your home that you need to regularly check for clogged drains. This is important in order to save water and save yourself from spending too much on replacing damaged pipelines and other fixture.
For the sink on your bathroom and kitchen, you must first make sure that all the air holes are covered with duct tape or cloth. Use the plunger as instructed above. While many homeowners opt to use expensive cleaning agents, it is best that you first try fixing the problem with a plunger in order to save some bucks in the task.
If the problem with clogged drains happened on your bathtub, you must first pull off the overflow cover plate. You can then put a rag onto the hole and start plunging the drain. For the showers, since there are no air holes that you need to cover, you can simply proceed in plunging the drain.